Reduced price! Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam View larger

Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam

New

Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam – 32 bit, Supports up to 6s (30v) with voltage monitoring.





More details

USD$209.6

-20%

USD$262.0

Add to wishlist

By buying this product you can collect up to 10 loyalty points. Your cart will total 10 points that can be converted into a voucher of USD$1.0.


    Product Description

    The next generation Alexmos controller. High voltage support up to 6s (30v)specially for larger gimbals running 80 mm and larger brushless gimbal motors.

    The controller can be used for building high-quality 3-axis camera stabilizing systems which can be mounted to UAV and for building handheld camera stabilizers.

    This version of the controller is our new direction in the development of the stabilizing solutions. It will replace the previous 8-bit version of the SimpleBGC controller, keeping 100% back-compatibility, but adding the new fuctionality.

    Basic functions of the controller

    • 32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axes stabilization.
    • Allows camera control with the RC or analog joystick.
    • Use several switchable profiles for different modes of operation
    • Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
    • Battery voltage monitoring, compensating voltage drop in the PID-regulator.
    • Low battery alarm (output to 5V active buzzer).
    • Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
    • Can supply up to 1A current for external devices on the 5V power line.
    • Dedicated UART-socket to connect optional Bluetooth module
    • Reverse-polarity protection, overheat and overcurrent protection
    • USB interface for the PC connection, to configure, control and upgrade firmware.
    • Graphical user interface to manage the settings. Windows / OS X / Linux versions.
    • Control through the Serial-protocol using dedicated API.
    • Improved attitude estimation algorythms
    • Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and  will make stable work in any frame position.

    IMU ‘Y’ Adapter for Dual IMU Connection is included

    Specifications

    Size of the board:50×50 mm
    Distance between the mounting holes:45 mm
    Diameter of the mounting holes:3 mm
    Power supply voltage:3S to 7S
    Maximum motor current:1,5 A
    5V output current to power external devices:up to 1 A

    Downloads for 32-bit boards

    General documentation and specifications

    Connection Diagramm for boards ver.3.0
    Serial Protocol Specification (ver. 2.4)

    Firmware upgrade

    You can check new versions and upgrade firmware from SimpleBGC GUI application running under Windows.
    (Note, that upgrade functionality is under development now and will be ready when new version of firmware will come)

    Alexmos 32 BIT SimpleBGC controller quick tuning configuration guide

    2.40b8

    GUI (Windows, OS X, Linux): SimpleBGC_GUI_2_40b8.zip (5Mb 11.03.2014)
    User Manual (english): SimpleBGC_32bit_manual_2_4_eng.pdf (598Kb 20.03.2014)

    This is the first version of firmware, that is fully compatible with the 2.40 version for 8-bit boards, and have additional features:

    • Allows to connect second IMU to know the frame angle. Advantage is more precise stabiliation and wider range of working angles and more reliable work in Follow Mode. Due to this you don’t need to use connection of external flight controller.
    • Number of profiles extended to 5
    • Additional RC protocols are supported: Futaba s-bus, Spektrum Satellite

     

    Note about brushless gimbals & Controllers

    Brushless gimbals and controllers are very new to the market and is an emerging technology. You will need some patience and effort to get it to work as seen on youtube. THIS IS NOT A PLUG AND PLAY DEVICE!

    You will need some understanding of Microsoft windows drivers, software settings and tuning the gimbal software to your liking and to suit your multirotor.

    We will try our best to answer your questions and point you in the right direction but getting things to work the way it’s supposed to will be YOUR RESPONSIBILITY. Please understand this before you purchase any Brushless Gimbal Related Item. 





Reviews

  • Videos by our customer
  • No customer comments for the moment.

    Write a review

    Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam

    Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam

    Alexmos 32bit 3 Axis Brushless Gimbal Controller – Basecam – 32 bit, Supports up to 6s (30v) with voltage monitoring.





    Write a review

    Customers who bought this product also bought:

    30 other products in the same category: