SkyRC E3 AC 11 Watt Balance Charger View larger

SkyRC E3 AC 11 Watt Balance Charger



Add to wishlist

No reward points for this product.

    The SkyRC E3 Charger is an economical, high quality 100-240V AC balance charger, designed for charging LiPo batteries from 2-3 cells in balance mode. The circuit power is 11W and the charger has a set charge rate of 1.2 amps.


    • Low cost
    • Power supply built in; the SkyRC E3 Balance Charger includes an AC power cord which will allow the unit to plug into a standard household electrical outlet.
    • AC Input 100-240V
    • Charge in balance mode: the voltage of each cell will be balanced so that the battery will perform better and the cycle life will be longer.
    • Simple single connection via JST/XH balance plug eliminates the need for separate charging leads.   

    We also sell JST/XH Balance Plug Extensions which will work with this charger:

    Balance Plug Extension for 2 Cell Lipo Batteries

    Balance Plug Extension for 3 Cell Lipo Batteries


    NOTE:  The SkyRC E3 AC Balance Charger is compatible with batteries that have a JST/XH type balance plug. The charger is not compatible with SMH-200 balance plugs such as those used on Thunder Power or Flight Power lipo batteries.


    The operation of this charger is very simple:


    1. Connect the charger to a standard household electrical outlet.  
    2. Connect the balance plug of your two- or three-cell lipo battery to the charger. 
    3. After a brief 2 second pause, the charger will detect the battery voltage and begin charging.  
    4. During the charge cycle, the LEDs will glow constant red (two LEDs for 2-cell battery, three LEDs for 3-cell battery).  
    5. At the end of the charge cycle the charger will stop charging and the appropriate LEDs will change from red to solid green (two LEDs for 2-cell battery, three LEDs for 3-cell battery).


    LED flashes redThe charger is ready to charge
    LED glows constant red The charger is charging  
    LED glows constant greenThe charging process is complete

    For more information about the operation of the SkyRC E3 AC Balance Charger, please refer to theUser Manual (link to .pdf)

    SkyRC E3 Balance Charger Specifications:

    Input Voltage: 100-240V,50-60HZ

    Circuit Power: 11W ±10%

    Charging Current:  1.2 amps (max)

    Battery Type (Selected by Switch):  LiPo

    Battery Cell Count: 2S-3S

    Cell Terminate Voltage:  4.2V ±0.02V

    Dimensions:  3.46" x 2.24"  x 1.37"  (88mm x 57mm x 35mm)

    Weight:  3.63 ounces (103 grams)


  • Videos by our customer
  • No customer comments for the moment.

    Write a review

    SkyRC E3 AC 11 Watt Balance Charger

    SkyRC E3 AC 11 Watt Balance Charger

    Write a review

    Customers who bought this product also bought:

    8 other products in the same category: