FPV Camera IR Gimbal Remote Control Shutter for Sony/Canon/Nikon/Pentax Camera Aerial Photography
Warning: Last items in stock!
No reward points for this product.
Support : SONY, CANON, NIKON, PANTAX
Supply range: 4.5V-5.5V
Dimenion : 32x14x5mm
Effective distance: ≥ 3 m
Mode 1, SONY photographed / video, three sections switch control
Mode 2, CANON photographed immediately
Mode 3, NIKOM photographed immediately
Mode 4, PANTAX photographed immediately photographed
Mode Selection Method: jumpered TX and RX ports.
First short TX and RX, and ensure the normal power supply 5V and GND port, the blue status light will stop flashing, represents the system is working properly, then goes out.
After off, LED will light up again, then off three seconds, this time on mode 1, if you want to use to change modes, should be within the three seconds off immediately pull out the jumper cap to enable RX and TX disconnected, 3 seconds after time, the indicator will lit, a function was normal startup mode;
If Mode 1 is not selected, after 3 seconds, the light will be flash again, then off, then select representatives to Mode 2, users also have three seconds of time to choose the method with mode 1;
Mode 3, Mode 4, selection method above.
NOTE: Select models can be saved, if there is no power on again on a jumper is used to select the model set
No customer comments for the moment.